IF Fullclean Foam

Product advantages

Description

IF Fullclean Foam is a strongly alkaline active cleaning agent with a very long bonding time.

The foam is characterized by:

• Very long bonding time, up to 2 hours after application, also on plastic walls! This allows the active components to act longer on the contamination and at the same time keep the surface moist.
• High level of complexing agent.
• The combination of high alkalinity and high chelating power gives improved degreasing in hard water areas.
• It offers excellent protein and fat solubility.
• The active foam is a dynamic foam! Penetrates very well into the dirt and keeps the dirt in solution through the emulsifiers and dispersers.
• Economical in use.

Contains: NaOH, complexing agents, wetting agents, foaming agents, emulsifiers and dispersants.

Directions for use : Apply with IF Applicator at 2%. Leave foam on for 1-2 hours and rinse.

Packaging : can 24 kg.

technology adheres the detergent to the surface to be cleaned. Lye without foaming agent runs directly off the surface, so there is no effective cleaning. By allowing foam to adhere longer, the foam bubbles act on the dirt. After a while, the foam bubbles burst and take the dissolved dirt down with them. Then foam bubbles will again settle on the dirt that has not yet been soaked off, after some time these foam bubbles will also burst and take the dissolved dirt down again. By repeating the above, a very effective cleaning is obtained.

Dynamic foam: Good cleaning and degreasing is achieved by: a longer bonding time of the dynamic foaming agent sufficient active substances (NaOH, complexing agents, emulsifiers and dispersants) a good application technique (IF Applicator: correct dosage, perfect foaming agent, etc.) using on dry walls and surfaces everywhere