nl en de es fr pl 
  • Innovative
  • Sharp prices
  • Tailored advice

IF Fullclean Foam Strong

Back to category
IF Fullclean Foam Strong
€ 138.00
excl. VAT
Contact us for the prices of this product.
3 to 5 working days

IF Fullclean Foam Strong is a strongly alkaline active cleaning agent with a very long bonding time.

Article number: 35-A01457

Product features

Amount:

Article number: 35-A01457
Delivery time: 3 to 5 working days

Product advantages

Very long bonding time, up to 2 hours after application, also on plastic walls! This allows the active components to act longer on the contamination and at the same time keep the surface moist.
High level of complexing agent.
The combination of high alkalinity and high chelating power gives improved degreasing in hard water areas.
It offers excellent protein and fat solubility.
The active foam is a dynamic foam! Penetrates very well into the dirt and keeps the dirt in solution through the emulsifiers and dispersers.
Economical in use.
Enormous savings on cleaning time and therefore also less manure.
Contains: NaOH, KOH, complexing agents, wetting agents, foaming agents, emulsifiers and dispersants.
Directions for use: Apply with IF Applicator at 1-2%. Leave foam on for 1-2 hours and rinse.

Description

IF Fullclean Foam Strong is a strongly alkaline active cleaning agent with a very long bonding time and particularly good cleaning capacity.

 

Why foam? By means of foam technology, the detergent adheres to the surface to be cleaned. Lye without foaming agent runs directly off the surface, so there is no effective cleaning. By allowing foam to adhere longer, the foam bubbles act on the dirt. After a while, the foam bubbles burst and take the dissolved dirt down with them. Then foam bubbles will again settle on the dirt that has not yet been soaked off, after some time these foam bubbles will also burst and take the dissolved dirt down again. By repeating the above, a very effective cleaning is obtained.

Dynamic foam: Good cleaning and degreasing is achieved by: a longer bonding time of the dynamic foaming agent sufficient active substances (NaOH, complexing agents, emulsifiers and dispersants) a good application technique (IF Applicator: correct dosage, perfect foaming agent, etc.) using on dry walls and surfaces everywhere


Recently viewed

Receive our brochure