Aggers drench pump professional complete

Agger's rumen pump Professional. With a rumen pump, one person can easily give a cow a large amount of water with possibly minerals (e.g. fresh cow). By filling the rumen with water immediately after calving, many problems, such as abomasum displacements, can be prevented. This rumen pump made of high-quality stainless steel consists of the pump, a probe with a nose clip and a special high-quality reinforced hose. The probe is very easy to insert and can be secured by means of the nose clip.

Instructions for use: For use by qualified persons only. Rinsing the probe: Before first use, rinse the probe of the Aggers Drench set with warm water (max. 50 C) and then attach it to the Aggers Penspomp.

Inserting the probe
1. Make sure the button at the end of the probe is positioned against the bite nozzle, the tubing is secured and the nose clip is open.
2. Hold the corner of the mouth and insert the bite nozzle to the back of the tongue so that the nose ring can be secured in the nostrils.
3. Release the probe lock, turn the cow's head slightly to the right and push the probe through the bite nozzle until there is 1 to 1.5 meters of tubing left. Check that the tubing passes through the esophagus by feeling the left side of the neck with your hand to see if the tubing is present there.
4. The end of the probe should now be in the rumen. If you are unsure whether this is the case, disconnect the tube and check if you can smell the rumen juices.
5. Secure the probe by turning the locking pin on the bite nozzle.
6. Pump with even strokes. Seek professional advice before using the pump. If you have any doubts that the bolus is not in the rumen, do not use the pump.